We haven’t covered Spendata much on Sourcing Innovation (SI), as it was only founded in 2015 and the doctor did a deep dive review on Spend Matters in 2018 when it launched (Part I and Part II, ContentHub subscription required), as well as a brief update here on SI where we said Don’t Throw Away that Old Spend Cube, Spendata Will Recover It For You!. the doctor did pen a 2020 follow up on Spend Matters on how Spendata was Rewriting Spend Analysis from the Ground Up, and that was the last major coverage. And even though the media has been a bit quiet, Spendata has been diligently working as hard on platform improvement over the last four years as they were the first four years and just released Version 2.2 (with a few new enhancements in the queue that they will roll out later this year). (Unlike some players which like to tack on a whole new version number after each minor update, or mini-module inclusion, Spendata only does a major version update when they do considerable revamping and expansion, recognizing that the reality is that most vendors only rewrite their solution from the ground up to be better, faster, and more powerful once a decade, and every other release is just an iteration, and incremental improvement of, the last one.)

So what’s new in Spendata V 2.2? A fair amount, but before we get to that, let’s quickly catch you up (and refer you to the linked articles above for a deep dive).

Spendata was built upon a post-modern view of spend analysis where a practitioner should be able to take immediate action on any data she can get her hands on whenever she can get her hands on it and derive whatever insights she can get for process (or spend) improvement. You never have perfect data, and waiting until Duey, Clutterbuck, and Howell¹ get all your records in order to even run your first report when you have a dozen different systems to integrate data from, multiple data formats to map, millions of records to classify, cleanse and enrich, and third party data feeds to integrate will take many months, if not a year, and during that year where you quest for the mythical perfect cube you will continue to lose 5% due to process waste, abuse, and fraud, and 3% to 15% (or more) across spend categories where you don’t have good management but could stem the flow simply by identifying them and putting in place a few simple rules or processes. And you can identify some of these opportunities simply by analyzing one system, one category, and one set of suppliers. And then moving on to the next one. And, in the process, Spendata automatically creates and maintains the underlying schema as you slowly build up the dimensions, the mapping, cleansing, and categorization rules, and the basic reports and metrics you need to monitor spend and processes. And maybe you can only do 60% to 80% piecemeal, but during that “piecemeal year”, you can identify over half of your process and cost savings opportunities and start saving now, versus waiting a year to even start the effort. When it comes to spend (related) data analysis, no adage is more true than “don’t put off until tomorrow what you can do today” with Spendata, because, and especially when you start, you don’t need complete or perfect data … you’d be amazed how much insight you can get with 90% in a system or category, and then if the data is inconclusive, keeping drilling and mapping until you get into the 95% to 98% accuracy range.

Spendata was also designed from the ground up to run locally and entirely in the browser, because no one wants to wait for an overburdened server across a slow internet connection, and do so in real time … and by that we mean do real analysis in real time. Spendata can process millions of records a minute in the browser, which allows for real time data loads, cube definitions, category re-mappings, dynamically derived dimensions, roll-ups, and drill downs in real-time on any well-defined data set of interest. (Since most analysis should be department level, category level, regional, etc., and over a relevant time span, that should not include every transaction for the last 10 years because beyond a few years, it’s only the quarter over quarter or year over year totals that become relevant, most relevant data sets for meaningful analysis even for large companies are under a few million transactions.) The goal was to overcome the limitations of the first two generations of spend analysis solutions where the user was limited to drilling around in, and deriving summaries of, fixed (R)OLAP cubes and instead allow a user to define the segmentations they wanted, the way they wanted, on existing or newly loaded (or enriched federated data) in real time. Analysis is NOT a fixed report, it is the ability to look at data in various ways until you uncover an inefficiency or an opportunity. (Nor is it simply throwing a suite of AI tools against a data set — these tools can discover patterns and outliers, but still require a human to judge whether a process improvement can be made or a better contract secured.)

Spendata was built as a third generation spend analysis solution where

• data can be loaded and processed at any point of the analysis
• the schema is developed and modified on the fly
• derived dimensions can be created instantly based on any combination of raw and previously defined derived dimensions
• additional datasets from internal or external sources can be loaded as their own cubes, which can then be federated and (jointly) drilled for additional insight
• new dimensions can be built and mapped across these federations that allow for meaningful linkages (such as commodities to cost drivers, savings results to contracts and purchasing projects, opportunities by size, complexity, or ABS analysis, etc.)
• all existing objects — dimensions, dashboards, views (think dynamic reports that update with the data), and even workspaces can be cloned for easy experimentation
• filters, which can define views, are their own objects, can be managed as their own objects, and can be, through Spendata‘s novel filter coin implementation, dragged between objects (and even used for easy multi-dimensional mapping)
• all derivations are defined by rules and formula, and are automatically rederived when any of the underlying data changes
• cubes can be defined as instances of other cubes, and automatically update when the source cube updates
• infinite scrolling crosstabs with easy Excel workbook generation on any view and data subset for those who insist on looking at the data old school (as well as “walk downs” from a high-level “view” to a low-level drill-down that demonstrates precisely how an insight was found
• functional widgets which are not just static or semi-dynamic reporting views, but programmable containers that can dynamically inject data into pre-defined analysis and dimension derivations that a user can use to generate what-if scenarios and custom views with a few quick clicks of the mouse
• offline spend analysis is also available, in the browser (cached) or on Electron.js (where the later is preferred for Enterprise data analysis clients)

Furthermore, with reference to all of the above, analyst changes to the workspace, including new datasets, new dashboards and views, new dimensions, and so on are preserved across refresh, which is Spendata’s “inheritance” capability that allows individual analysts to create their own analyses and have them automatically updated with new data, without losing their work …

… and this was all in the initial release. (Which, FYI, no other vendor has yet caught up to. NONE of them have full inheritance or Spendata‘s security model. And this was the foundation for all of the advanced features Spendata has been building since its release six years ago.)

After that, as per our updates in 2018 and 2020, Spendata extended their platform with:

• Unparalleled Security — as the Spendata server is designed to download ONLY the application to the browser, or Spendata‘s demo cubes and knowledge bases, it has no access to your enterprise data;
• Cube subclassing & auto-rationalization — power users can securely setup derived cubes and sub-cubes off of the organizational master data cubes for the different types of organizational analysis that are required, and each of these sub-cubes can make changes to the default schema/taxonomy, mappings, and (derived) dimensions, and all auto-update when the master cube, or any parent cube in the hierarchy, is updated
• AI-Based Mapping Rule Identification from Cube Reverse Engineering — Spendata can analyze your current cube (or even a report of vendor by commodity from your old consultant) and derive the rules that were used for mapping, which you can accept, edit, or reject — we all know black box mapping doesn’t work (no matter how much retraining you do, as every “fix” all of a sudden causes an older transaction to be misclassified); but generating the right rules that can be human understood and human maintained guarantees 100% correct classification 100% of the time
• API access to all functions, including creating and building workspaces, adding datasets, building dimensions, filtering, and data export. All Spendata functions are scriptable and automatable (as opposed to BI tools with limited or nonexistent API support for key functions around building, distributing, and maintaining cubes).

However, as we noted in our introduction, even though this put Spendata leagues beyond the competition (as we still haven’t seen another solution with this level of security; cube subclassing with full inheritance; dynamic workspace, cube, and view creation; etc.), they didn’t stop there. In the rest of this article, we’ll discuss what’s new from the viewpoint of Spendata Competitors:

Spendata Competitors: 7 Things I Hate About You

Cue the Miley Cyrus, because if competitors weren’t scared of Spendata before, if they understand ANY of this, they’ll be scared now (as Spendata is a literal wrecking ball in analytic power). Spendata is now incredibly close to negating entire product lines of not just its competitors, but some of the biggest software enterprises on the planet, and 3.0 may trigger a seismic shift on how people define entire classes of applications. But that’s a post for a later day (but should cue you up for the post that will follow this on on just precisely what Spendata 2.2 really is and can do for you). For now, we’re just going to discuss seven (7) of the most significant enhancements since our last coverage of Spendata.

Dynamic Mapping

Filters can now be used for mapping — and as these filters update, the mapping updates dynamically. Real-time reclassify on the fly in a derived cube using any filter coin, including one dragged out of a drill down in a view. Analysis is now a truly continuous process as you never have to go back and change a rule, reload data, and rebuild a cube to make a correction or see what happens under a reclassification.

View-Based Measures

Integrate any rolled up result back into the base cube on the base transactions as a derived dimension. While this could be done using scripts in earlier versions, it required sophisticated coding skills. Now, it’s almost as easy as a drag-and-drop of a filter coin.

Hierarchical Dashboard Menus

Not only can you organize your dashboards in menus and submenus and sub-sub menus as needed, but you can easily bookmark drill downs and add them under a hierarchical menu — makes it super easy to create point-based walkthroughs that tell a story — and then output them all into a workbook using Spendata‘s capability to output any view, dashboard, or entire workspace as desired.

Search via Excel

While Spendata eliminates the need for Excel for Data Analysis, the reality is that is where most organizational data is (unfortunately) stored, how most data is submitted by vendors to Procurement, and where most Procurement Professionals are the most comfortable. Thus, in the latest version of Spendata, you can drag and drop groups of cells from Excel into Spendata and if you drag and drop them into the search field, it auto-creates a RegEx “OR” that maintains the inputs exactly and finds all matches in the cube you are searching against.

Perfect Star Schema Output

Even though Spendata can do everything any BI tool on the market can do, the reality is that many executives are used to their pretty PowerBI graphs and charts and want to see their (mostly static) reports in PowerBI. So, in order to appease the consultancies that had to support these executives that are (at least) a generation behind on analytics, they encoded the ability to output an entire workspace to a perfect star schema (where all keys are unique and numeric) that is so good that many users see a PowerBI speed up by a factor of almost 10. (As any analyst forced to use PowerBI will tell you, when you give PowerBI any data that is NOT in a perfect star schema, it may not even be able to load the data, and that it’s ability to work with non-numeric keys at a speed faster than you remember on an 8088 is nonexistent.)

Power Tags

You might be thinking “tags, so what“. And if you are equating tags with a hashtag or a dynamically defined user attribute, then we understand. However, Spendata has completely redefined what a tag is and what you can do with it. The best way to understand it is a Microsoft Excel Cell on Steroids. It can be a label. It can be a replica of a value in any view (that dynamically updates if the field in the view updates). It can be a button that links to another dashboard (or a bookmark to any drill-down filtered view in that dashboard). Or all of this. Or, in the next Spendata release, a value that forms the foundation for new derivations and measures in the workspace just like you can reference a random cell in an Excel function. In fact, using tags, you can already build very sophisticated what-if analysis on-the-fly that many providers have to custom build in their core solutions (and take weeks, if not months, to do so) using the seventh new capability of Spendata, and usually do it in hours (at most).

Embedded Applications

In the latest version of Spendata, you can embed custom applications into your workspace. These applications can contain custom scripts, functions, views, dashboards, and even entire datasets that can be used to instantly augment the workspace with new analytic capability, and if the appropriate core columns exist, even automatically federate data across the application datasets and the native workspace.

Need a custom set of preconfigured views and segments for that ABC Analysis? No sweat, just import the ABC Analysis application. Need to do a price variance analysis across products and geographies, along with category summaries? No problem. Just import the Price Variance and Category Analysis application. Need to identify opportunities for renegotiation post M&A, cost reduction through supply base consolidation, and new potential tail spend suppliers? No problem, just import the M&A Analysis app into the workspace for the company under consideration and let it do a company A vs B comparison by supplier, category, and product; generate the views where consolidation would more than double supplier spend, save more than 100K on switching a product from a current supplier to a lower cost supplier; and opportunities for bringing on new tail spend suppliers based upon potential cost reductions. All with one click. Not sure just what the applications can do? Start with the demo workspaces and apps, define your needs, and if the apps don’t exist in the Spendata library, a partner can quickly configure a custom app for you.

And this is just the beginning of what you can do with Spendata. Because Spedata is NOT a Spend Analysis tool. That’s just something it happens to do better than any other analysis tool on the market (in the hands of an analyst willing to truly understand what it does and how to use it — although with apps, drag-and-drop, and easy formula definition through wizardly pop-ups, it’s really not hard to learn how to do more with Spendata than any other analysis tool).

But more on this in our next article. For The Times They Are a-Changin’.

¹ Duey, Clutterbuck, and Howell keeps Dewey, Cheatem, and Howe on retainer … it’s the only way they can make sure you pay the inflated invoices if you ever wake up and realize how much you’ve been fleeced for …